Xiaomi 12V Max Brushless Cordless Drill UK
- Powerful brushless motor with lithium battery
- 30N·m powerful torque
- 30-speed precision control
- 3 operating modes
- Smart Display
- Category:Smart Home Devices
- Warranty: 2 Year Seller Warranty
- Order within
* Not suitable for use on concrete
* The maximum torque error is ±5Nm due to the measurement device used. Torque test method: With the battery fully charged, the function selection button is pushed to enter screwing mode. A torque tester is then used to test the locked-rotor torque at level 30.
* No-load speed tolerance is approximately 10%. Speed test method: The fully charged device is run for 2 minutes at no load and the no-load speed is then tested with a speed tester.
* Screwing test method: With the device fully charged, the gearbox is adjusted to low speed (screwing mode). In manual "M" mode, the tail torque is adjusted to 10 and an M4 x 25mm self-tapping screw is screwed into the pine board until the battery runs out.
*Steel plate drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a hole is drilled into a 6mm-thick steel plate with a 6mm twist drill.
*Wooden board drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a 40mm-deep hole is drilled into a white pine board with a 7mm wood bit.
*The whole unit compliance test report was issued by Waltek Services Test Group Ltd. in Foshan; Test Report No.: WTF21F3015226G.
*The whole unit ROHS test report was issued by EMTEK (Dongguan) Technology Co., Ltd.; Test Report No.: ED201110010C.
*The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd.; Test Report No.: ES201110017E.
*The environmental reliability test report was issued by Intertek Shenzhen Ltd.; Test Report No.: SZHH01513728.
*The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd.; Test Report No.: PTC20110204401S-GB01.
The screwdriver bit test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test Report No.: G20201629F. Hardness varies by ±2HRC.
* Two extension rod designs are available and will be shipped randomly.
* The water-repellent fabric test was conducted by Centre Testing International Co., Ltd. and is waterproof up to class 4–5; Test Report No.: A2210085110101C.
30N·m
Security torx: T9H/T10H/T15H/T20H/T25H
Rated voltage: 12V⎓
Hex: H3/H4/H5/H6
No-load drilling speed: 0–1400rpm (electric drill speed)
0–370rpm (screwing speed)
Slotted: SL4/SL6
Y bit: Y1
Charging specifications: 5V⎓3A; 9V⎓1.5A
Tri-wing: 2.3
Charging time: 120–180min
Square: S0/S1
Drill bit type: Metal twist drill bit 3/4/5/6
Wood drill bit 4/5/6/7
U bit: U2.6
Extension rod: 60mm
Package Contents
Electric drill x1
Storage pouch x1
Adaptor x1
Charging cable x1
Bit storage container x1
Drill bit x8
Screwdriving bit x24
Extension rod x1
User manual x1
* Not suitable for use on concrete
* The maximum torque error is ±5Nm due to the measurement device used. Torque test method: With the battery fully charged, the function selection button is pushed to enter screwing mode. A torque tester is then used to test the locked-rotor torque at level 30.
* No-load speed tolerance is approximately 10%. Speed test method: The fully charged device is run for 2 minutes at no load and the no-load speed is then tested with a speed tester.
* Screwing test method: With the device fully charged, the gearbox is adjusted to low speed (screwing mode). In manual "M" mode, the tail torque is adjusted to 10 and an M4 x 25mm self-tapping screw is screwed into the pine board until the battery runs out.
*Steel plate drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a hole is drilled into a 6mm-thick steel plate with a 6mm twist drill.
*Wooden board drilling test method: With the device fully charged, the gearbox is adjusted to the high-speed setting (drilling mode). In M mode, the tail torque is adjusted to 30 and a 40mm-deep hole is drilled into a white pine board with a 7mm wood bit.
*The whole unit compliance test report was issued by Waltek Services Test Group Ltd. in Foshan; Test Report No.: WTF21F3015226G.
*The whole unit ROHS test report was issued by EMTEK (Dongguan) Technology Co., Ltd.; Test Report No.: ED201110010C.
*The EMC test report was issued by EMTEK (Shenzhen) Co., Ltd.; Test Report No.: ES201110017E.
*The environmental reliability test report was issued by Intertek Shenzhen Ltd.; Test Report No.: SZHH01513728.
*The battery test report was issued by Precise Testing & Certification (Guangdong) Co., Ltd.; Test Report No.: PTC20110204401S-GB01.
The screwdriver bit test report was issued by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Test Report No.: G20201629F. Hardness varies by ±2HRC.
* Two extension rod designs are available and will be shipped randomly.
* The water-repellent fabric test was conducted by Centre Testing International Co., Ltd. and is waterproof up to class 4–5; Test Report No.: A2210085110101C.
30N·m
Security torx: T9H/T10H/T15H/T20H/T25H
Rated voltage: 12V⎓
Hex: H3/H4/H5/H6
No-load drilling speed: 0–1400rpm (electric drill speed)
0–370rpm (screwing speed)
Slotted: SL4/SL6
Y bit: Y1
Charging specifications: 5V⎓3A; 9V⎓1.5A
Tri-wing: 2.3
Charging time: 120–180min
Square: S0/S1
Drill bit type: Metal twist drill bit 3/4/5/6
Wood drill bit 4/5/6/7
U bit: U2.6
Extension rod: 60mm
Package Contents
Electric drill x1
Storage pouch x1
Adaptor x1
Charging cable x1
Bit storage container x1
Drill bit x8
Screwdriving bit x24
Extension rod x1
User manual x1
SHIPPING POLICY:
- If your order is equal to or above GBP 50, the cost to ship your products will be zero
- Shipping charges for your order below GBP 50 will be calculated and displayed at checkout
All orders are dispatched within 1 business day (for same day dispatch cut off time is before 12 noon, order received after cut off time will dispatch next day) once payment is processed, and it takes 3 to 5 business days to be delivered to customers. Customers can expect to receive their ordered product within 3 to 5 business days after order is shipped. (Remote area may take longer)
Customer can also choose from below shipping method at check out page:
- Standard Delivery in 3-5 business days. (Business days are Monday-Friday, Saturday and Sunday not included in shipping days)
- Express Delivery in 1-2 business days. (Order received on Friday after 12 Noon local time will be ships on Monday)
- Premium Next Business Day Delivery. (Order before 12 Noon local time for next business day delivery.)
Brightex Retail will provide tracking number to all its customers within 1 to 2 working days once the order is placed and payment is received.
Unless Brightex Retail needs to do verification of the transaction then our Operation Manager will Email within 1 to 2 working days for verification.
Brightex Retail will use premium courier service and will dispatch orders in a timely manner.
All orders are usually delivered between 3 to 5 business days but any delay caused by holidays or pandemic or any other reason by courier service is beyond our control and Brightex Retail cannot be held liable.
NOTE: Any order placed in weekend will be processed on next working day
RETURN POLICY
Brightex Retail Return Guidelines are applicable only to products purchased directly from brightexretail.com. If you purchase products through offline channels, please contact the final vendor who sells the products to you. All returns must meet the overall guidelines for the individual return policy to apply.
Right to cancel the product: You can cancel your order up to 14 days after the order is delivered. You don’t need to give a reason for canceling. You can write to us at support@brightexretail.com.
You can return a faulty item for an exchange or a refund within 30 days of purchase or delivery.
- We don’t cover:
- faults caused by accident damage, neglect, tampered, customized/altered, misuse, or normal wear and tear.
- any product with missing, damaged, altered, or unreadable IMEI or serial number label, manufacturer model, or part number label.
- any product that is returned without all original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product.
- If more than 30 days have passed and the item is still in the 2-year warranty period from purchase or delivery, write to us at support@brightexretail.com for warranty claim. Kindly note that you will need to share the proof of purchase when you request service against warranty.
- In case of any queries; you can reach us by email on: support@brightexretail.com , and we will certainly find a way to help.
REFUND POLICY
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If you have exercised the right to cancel the order even if it is below GBP 50, we will be refunding the shipping fee charged on making that refund too.
If your return is approved, we will initiate a refund to your credit card (or original method of payment).
You will receive the credit within a certain amount of days, depending on your card issuer's policies.